Loading...
 

STM32MP1 support available in SW4STM32

   With System Workbench for Linux, Embedded Linux on the STM32MP1 family of MPUs from ST was never as simple to build and maintain, even for newcomers in the Linux world.
And, if you install System Workbench for Linux in System Workbench for STM32 you can seamlessly develop and debug asymmetric applications running partly on Linux, partly on the Cortex-M4; you can download a short video showcasing this on the ac6-tools website (registration required).

System Workbench for STM32


You are viewing a reply to stm32L4-Discovery and cubemx ?  

stm32L4-Discovery and cubemx ?

hi

i think the problem is in line 6 but not sure what it means ....and last in the screendump you can see that the target halted ...dont now how to start ..

Open On-Chip Debugger 0.9.0-dev-00418-g9afb8b4-dirty (2015-09-28-12:09)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Warn : use ‘stm32l4.cpu’ as target identifier, not ‘0’
adapter_nsrst_delay: 100
srst_only separate srst_nogate srst_open_drain connect_assert_srst
adapter speed: 1800 kHz
srst_only separate srst_nogate srst_open_drain connect_assert_srst
Info : clock speed 1800 kHz
Info : STLINK v2 JTAG v25 API v2 SWIM v13 VID 0x0483 PID 0x374B
Info : using stlink api v2
Info : Target voltage: 3.238973
Info : stm32l4.cpu: hardware has 6 breakpoints, 4 watchpoints
adapter speed: 240 kHz
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x08001220 msp: 0x20020000
Info : Unable to match requested speed 8000 kHz, using 4000 kHz
Info : Unable to match requested speed 8000 kHz, using 4000 kHz
adapter speed: 4000 kHz

    • Programming Started **

auto erase enabled
Info : STM32L4xx flash size is 1024kb, base address is 0x8000000
target state: halted
target halted due to breakpoint, current mode: Thread
xPSR: 0x21000000 pc: 0x20000068 msp: 0x20020000
wrote 6144 bytes from file Debug/test_l4_4.elf in 0.312000s (19.231 KiB/s)

    • Programming Finished **
    • Verify Started **

target state: halted
target halted due to breakpoint, current mode: Thread
xPSR: 0x61000000 pc: 0x2000002e msp: 0x20020000
verified 4920 bytes in 0.328601s (14.622 KiB/s)

    • Verified OK **
    • Resetting Target **

adapter speed: 240 kHz
shutdown command invoked