Loading...
 

STM32MP1 support available in SW4STM32

   With System Workbench for Linux, Embedded Linux on the STM32MP1 family of MPUs from ST was never as simple to build and maintain, even for newcomers in the Linux world.
And, if you install System Workbench for Linux in System Workbench for STM32 you can seamlessly develop and debug asymmetric applications running partly on Linux, partly on the Cortex-M4; you can download a short video showcasing this on the ac6-tools website (registration required).

System Workbench for STM32


Load other .text section with gdb

Hi Pascale,

please find the log related to the section loading with -d3 option

515,617 &”load C:\\projects\\project_L4\\Debug\\project_L4.elf \n”
515,617 ~”Loading section .ram2_bss, size 0x7ef4 lma 0x10000000\n”
515,617 19+download,{section=”.ram2_bss”,section-size=”32500”,total-size=”2646205”}
515,617 19+download,{section=”.ram2_bss”,section-sent=”4096”,section-size=”32500”,total-sent=”4096”,\
total-size=”2646205”}
515,914 20-list-thread-groups i1
516,320 19+download,{section=”.ram2_bss”,section-sent=”16384”,section-size=”32500”,total-sent=”16384\
“,total-size=”2646205”}
517,007 19+download,{section=”.ram2_bss”,section-sent=”28672”,section-size=”32500”,total-sent=”28672\
“,total-size=”2646205”}
522,414 ~”Loading section .isr_vector, size 0x188 lma 0x8000000\n”
522,429 19+download,{section=”.isr_vector”,section-size=”392”,total-size=”2646205”}
522,429 ~”Loading section .rodata, size 0x27e0 lma 0x8000188\n”
522,429 19+download,{section=”.rodata”,section-size=”10208”,total-size=”2646205”}
522,429 ~”Loading section .ARM, size 0x8 lma 0x8002968\n”
522,429 19+download,{section=”.ARM”,section-size=”8”,total-size=”2646205”}
522,429 ~”Loading section .init_array, size 0x8 lma 0x8002970\n”
522,429 19+download,{section=”.init_array”,section-size=”8”,total-size=”2646205”}
522,429 ~”Loading section .fini_array, size 0x8 lma 0x8002978\n”
522,429 19+download,{section=”.fini_array”,section-size=”8”,total-size=”2646205”}
522,429 ~”Loading section .data, size 0x8e0 lma 0x8002980\n”
522,429 19+download,{section=”.data”,section-size=”2272”,total-size=”2646205”}
522,429 ~”Loading section .text, size 0x2e0c0 lma 0x8003260\n”
522,429 19+download,{section=”.text”,section-size=”188608”,total-size=”2646205”}
522,429 ~”Loading section .jtable_xxxxx_api, size 0x60 lma 0x8077c00\n”
522,429 19+download,{section=”.jtable_xxxx_api”,section-size=”96”,total-size=”2646205”}
522,429 ~”Loading section .jtable_xxx_api, size 0x150 lma 0x8078000\n”
522,429 19+download,{section=”.jtable_xxx_api”,section-size=”336”,total-size=”2646205”}
529,367 ~”Start address 0x80045b0, load size 234436\n”
529,367 ~”Transfer rate: 16 KB/sec, 8372 bytes/write.\n”
529,367 19^done


jtable_xxxx_api and jtable_xxx_api are my two jump tables.

So no additional error appeared.

Were you able to reproduce the issue ?

I read in the gdb doc that a configuration file should be somewhere to select which sections must be loaded, but can’t find it ...

Thanks for your help,
Best Regards

Sylvain